first image

Add Note Edit Step 16  ¶ 

  • Remove the two Phillips screws securing the side of the hard drive to the internal frame.

first image
thumb image 1
thumb image 2

Add Note Edit Step 17  ¶ 

  • Slide the hard drive toward the speaker to disconnect it from the interconnect board.

  • Lift the hard drive from the edge opposite the fan and remove it from the internal frame.

first image

Add Note Edit Step 18 — Hard Drive Replacement  ¶ 

  • Use the flat end of a spudger to pry the hard drive thermal sensor board off the adhesive securing it to the side of the hard drive.

Next » « Previous

Comments Add Note Comments are offturn on