Installing iPod Shuffle 2nd Generation Logic Board Assembly

Remove the logic board assembly on your 2nd generation iPod Shuffle.

  • Add Note x
  • x 5

Use this guide to remove your Shuffle's logic board assembly. The logic board assembly includes the logic board, headphone jack, and battery.

Tools
first image

Add Note Edit Step 1 — Logic Board Assembly  ¶ 

  • Before beginning, be sure your Shuffle is turned off as shown.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.

  • Remove the plastic cover and set it aside.

first image

Add Note Edit Step 3  ¶ 

  • Remove the two Phillips screws from the headphone jack side of the Shuffle.

Next » « Previous

Comments Add Note Comments are offturn on