Installing iPod Nano 5th Generation Battery

Bringing the power back to your 5th generation iPod Nano.

  • Add Note x
  • x 11

Bringing the power back to your 5th generation iPod Nano.

Sections
Tools
Tools (continued)
Relevant parts
first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 1 — Glass Panel  ¶ 

  • Insert an iPod opening tool between the outer case and top bezel near the screen.

  • Lifting up on the iPod opening tool, gently pry the top panel off of the device.

  • The bezel is attached with adhesive, and may require some force to remove.

first image

Add Note Edit Step 2  ¶ 

  • Use an iPod opening tool to pry the hold switch button off of the hold switch plate.

first image

Add Note Edit Step 3  ¶ 

  • Remove the two 3.2mm screws.

  • These screws are angled toward the outer case and are also very small. Use a sharp screwdriver and be careful not to strip the screws.

Next » « Previous

Comments Add Note Comments are offturn on