first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 16  ¶ 

  • Use the flat end of a spudger to separate the battery from the adhesive securing it to the outer case.

  • The lithium polymer battery used in the Nano is very flexible. Try not to deform it excessively while separating it from the outer case.

  • Use the flat end of a spudger to push the logic board assembly and battery slightly out of the bottom of the Nano. Stop once it pops out a little bit.

first image

Add Note Edit Step 17  ¶ 

  • Use the edge of an iPod opening tool to peel the click wheel ribbon cable and its ZIF socket off the dock connector.

first image
thumb image 1
thumb image 2

Add Note Edit Step 18  ¶ 

  • Use the edge of an iPod opening tool to flip the ZIF cable lock up toward the headphone jack.

Next » « Previous

Comments Add Note Comments are offturn on