first image

Add Note Edit Step 7  ¶ 

  • Lift the glass panel out of the Nano.

  • Before reinstalling the glass panel, be sure to clean the face of the display and the inside of the panel as any dust or fingerprints will be annoyingly visible when the Nano is turned on.

first image

Add Note Edit Step 8 — Display  ¶ 

  • Use the edge of an iPod opening tool to separate the hold switch from the adhesive securing it to the top edge of the display.

  • The hold switch ribbon cable is extremely fragile and easily broken. Work gently.

first image

Add Note Edit Step 9  ¶ 

  • Peel back the Kapton tape covering the display data cable socket.

Next » « Previous

Comments Add Note Comments are offturn on