first image

Add Note Edit Step 7  ¶ 

  • Lift up the hard drive to expose the headphone jack ribbon connector (indicated by the yellow box).

  • If the hard drive bumpers come loose, make sure to put them back with the notch as shown in the picture.

first image
thumb image 1
thumb image 2

Add Note Edit Step 8  ¶ 

  • With the iPod opening tool, gently lift the brown tab of the headphone ribbon cable connector. The tab will rotate up 90 degrees, releasing the ribbon cable.

  • Using your fingers, pull out the headphone jack ribbon cable.

first image

Add Note Edit Step 9  ¶ 

  • The front and back of the iPod should now be completely separated.

Next » « Previous

Comments Add Note Comments are offturn on