Installing iMac G5 20" Model A1145 Front Bezel

  • Add Note x
  • x 3

Remove the front bezel to access your iMac's internals.

Sections
Tools
first image

Add Note Edit Step 1 — Access Door  ¶ 

  • Orient the iMac face-side down on a table with the bottom edge facing yourself.

  • Remove the two Phillips screws securing the access door to the bottom grille of your iMac.

  • The screws are captive in the access door.

first image

Add Note Edit Step 2  ¶ 

  • Remove the access door.

first image

Add Note Edit Step 3 — Front Bezel  ¶ 

  • Remove the three T8 Torx screws securing the front bezel to the rear case along the lower edge of the iMac.

Next » « Previous

Comments Add Note Comments are offturn on