Installing iMac G5 20" Model A1076 Right Fan

  • Add Note x
  • x 3

Keep temperatures down and replace that broken fan!

Sections
Tools
first image

Add Note Edit Step 1 — Rear Panel  ¶ 

  • Lay the iMac display-side down on a flat surface.

  • Loosen the three Phillips screws securing the rear panel to the iMac.

  • These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Lift the rear panel slightly near the bottom of the iMac.

  • Pull the rear panel toward yourself and remove it from the iMac.

first image

Add Note Edit Step 3 — Fan Duct  ¶ 

  • Remove the following two screws:

    • One 11 mm T10 Torx.

    • One 10.6 mm T8 Torx.

Next » « Previous

Comments Add Note Comments are offturn on