Installing iMac G5 17" Model A1144 Camera Board

  • Add Note x

iSight not working? Replace your camera board.

Sections
Tools
Tools (continued)
first image

Add Note Edit Step 1 — Access Door  ¶ 

  • Loosen the two Phillips screws securing the access door to your iMac.

  • These screws are captive in the access door.

first image

Add Note Edit Step 2  ¶ 

  • Remove the access door from your iMac.

first image

Add Note Edit Step 3 — Front Bezel  ¶ 

  • Remove the three T8 Torx screws securing the front bezel to the rear panel.

Next » « Previous

Comments Add Note Comments are offturn on