Installing iBook G4 14" 1.42 GHz Display

  • Add Note x
  • x 12

Change out the entire display assembly, including the inverter, AirPort antenna, hinges and plastic casing.

Sections
Files
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Keyboard  ¶ 

  • Pull the keyboard release tabs (shown in yellow) toward you and lift up on the keyboard until it pops free.

  • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw (shown in orange) 180 degrees in either direction and try again.

  • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

first image

Add Note Edit Step 3  ¶ 

  • Loosen the four silver Phillips screws that secure the RAM shield.

  • These screws will not come out all the way. The screws are held captive to the RAM shield to prevent them from getting lost.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 50+ in stock

Spudger

$2.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Flathead 3/32" or 2.5 mm Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 11 in stock

Related Products

Recommended Tools

Home Tech Toolkit

$24.95 · 22 in stock

Sorting Tray

$7.95 · 16 in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$9.95 · 50+ in stock

Comments Add Note Comments are offturn on