first image

Add Note Edit Step 19  ¶ 

  • Remove the small greasy springs with white plastic caps from either side of the battery contacts.

first image

Add Note Edit Step 20 — Upper Case  ¶ 

  • All of the screws in the following step have small heads - the screws with larger heads hold the bottom shield on.

  • Remove the following 9 screws on the bottom of the computer:

    • Three 3 mm Phillips around the battery compartment.

    • Three 5 mm Phillips on the left and bottom edges.

    • Three 14.5 mm Phillips on the top and right edges (you may have to peel back the foil tape to reveal the screw near the security lock slot).

first image

Add Note Edit Step 21  ¶ 

  • Turn over the computer and open it.

  • Pry up the magnet covering a Phillips screw near the middle of the computer.

  • You may need to peel back the serial number sticker to access the magnet.

Next » « Previous

Comments Add Note Comments are offturn on