first image

Add Note Edit Step 10  ¶ 

  • To free the hard drive, remove the two T8 Torx screws from the right wall of the battery housing.

first image

Add Note Edit Step 11  ¶ 

  • Remove the hard drive by gently grasping the orange ribbon cable and lifting the left edge up and out of the computer.

  • There are four rubber bumpers that fit over the hard drive screws. Ensure that these bumpers come out when you remove the hard drive.

first image

Add Note Edit Step 12  ¶ 

  • Your laptop should look approximately like this.

Next » « Previous

Comments Add Note Comments are offturn on