first image

Add Note Edit Step 13 — DVD Drive  ¶ 

  • If your G4 has a CD-RW or Combo drive, the pictures in the following steps will not exactly match your computer.

  • Before continuing, place a soft cloth on your work surface to rest the computer on. Turn the G4 over, making sure the DVD drive doesn't fall out. Place the computer on the cloth.

first image

Add Note Edit Step 14  ¶ 

  • Bend the silver metal EMI clip so that it is vertical. This part may fall out after removing the DVD drive.

  • The EMI clip is not essential for reassembling the computer. If the clip falls out, don't worry about putting it back in.

first image

Add Note Edit Step 15  ¶ 

  • Turn the G4 over.

  • Disconnect the orange DVD ribbon cable from the logic board using a spudger or the tip of your finger

Next » « Previous

Comments Add Note Comments are offturn on