Installing PowerBook G4 Titanium Mercury Lower Case

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x

Just remove a few Phillips screws, and the bottom case slides off.

Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Lower Case  ¶ 

  • Turn the G4 over.

  • Remove the eight Phillips screws from the lower case.

first image

Add Note Edit Step 2  ¶ 

  • Using your thumbs, slide the lower case away from you.

  • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

first image

Add Note Edit Step 3  ¶ 

  • Your laptop should look approximately like this.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Titanium Mercury device page.

Did you successfully follow this guide?

This guide has been completed 0 times.

Required Tools

Phillips #0 Screwdriver

$4.95 · 50+ in stock

Related Products

G4 Titanium Mercury Lower Case

$79.95

Recommended Tools

Home Tech Toolkit

$24.95 · 22 in stock

Sorting Tray

$7.95 · 16 in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$9.95 · 50+ in stock

Comments Add Note Comments are offturn on