Installing PowerBook G4 Titanium DVI DC-In Board

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x
  • x 4

Tripped over your power cord? At least you don't have to replace the entire logic board.

Sections
Files
Tools
Relevant parts
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Battery  ¶ 

  • Locate the battery release tab on the underside of the G4.

  • Slide the battery release tab to the left and lift the battery out of the computer.

first image

Add Note Edit Step 2 — Lower Case  ¶ 

  • Remove the seven T8 Torx screws from the lower case.

first image

Add Note Edit Step 3  ¶ 

  • Using your thumbs, slide the lower case away from you.

  • The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 50+ in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

Related Products

G4 Titanium DVI DC-In Board

$49.95

Recommended Tools

Home Tech Toolkit

$24.95 · 22 in stock

Sorting Tray

$7.95 · 16 in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$9.95 · 50+ in stock

Comments Add Note Comments are offturn on