Installing PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Memory Door

  • Add Note x

Remove your memory door to access the RAM chips.

Sections
Files
Tools
Relevant parts
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Battery  ¶ 

  • Use your thumbs to push the two battery retaining tabs away from the battery.

  • The battery should pop up enough to rotate it toward yourself and lift it out of the lower case.

first image

Add Note Edit Step 2 — Memory Door  ¶ 

  • Remove the three 2.3 mm Phillips screws securing the memory cover to the lower case.

first image
thumb image 1
thumb image 2

Add Note Edit Step 3  ¶ 

  • Lift the memory cover slightly and pull it toward yourself to remove it from the lower case.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) device page.

Did you successfully follow this guide?

This guide has been completed 0 times.

Comments Add Note Comments are offturn on