Installing PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) DC-In Board

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

  • Add Note x

Trip over your power cord? Use this guide to replace your DC-in board.

Sections
Tools
Tools (continued)
Relevant parts
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Battery  ¶ 

  • Use your thumbs to push the two battery retaining tabs away from the battery.

  • The battery should pop up enough to rotate it toward yourself and lift it out of the lower case.

first image

Add Note Edit Step 2 — Memory Door  ¶ 

  • Remove the three 2.3 mm Phillips screws securing the memory cover to the lower case.

first image
thumb image 1
thumb image 2

Add Note Edit Step 3  ¶ 

  • Lift the memory cover slightly and pull it toward yourself to remove it from the lower case.

Next » « Previous

Comments Add Note Comments are offturn on