Installing PowerBook G4 Aluminum 15" 1.67 GHz Right Speaker Housing

  • Add Note x

This guide will show you how to remove the right speaker housing from your PowerBook.

Sections
Files
Tools
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Upper Case  ¶ 

  • Remove the following 10 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Four 3 mm Phillips around the memory compartment.

    • Four 16 mm Phillips along the hinge.

first image

Add Note Edit Step 3  ¶ 

  • Remove the memory compartment cover.

  • Remove the two 12 mm Phillips screws on the Aluminum bracket at the top of the memory compartment.

Next » « Previous

Comments Add Note Comments are offturn on