Installing PowerBook G4 Aluminum 15" 1.5-1.67 GHz Right Ambient Light Sensor

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x

This detects the light level in the room to adjust the backlit keyboard.

Sections
Files
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Upper Case  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Remove the following 8 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Two 12 mm Phillips on either side of the memory compartment.

    • Four 16 mm Phillips along the hinge.

Next » « Previous

Comments Add Note Comments are offturn on