first image

Add Note Edit Step 22  ¶ 

  • Use a firm plastic edge to scrape the thermal material off the processor.

  • When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place.

  • Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste.

first image

Add Note Edit Step 23 — Speakers  ¶ 

  • Remove the two 3 mm black Phillips screws from the left ambient light sensor board.

  • Lift the left ambient light sensor board out of the computer, removing tape as necessary.

first image

Add Note Edit Step 24  ¶ 

  • Deroute the Bluetooth and RJ-11 cables from around the left side of the speaker.

Next » « Previous

Comments Add Note Comments are offturn on