first image

Add Note Edit Step 28  ¶ 

  • Apply a new layer of thermal paste to the copper heat conduit.

  • When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place.

  • Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste.

first image

Add Note Edit Step 29 — Right USB Board  ¶ 

  • Your laptop should look approximately like this.

first image

Add Note Edit Step 30  ¶ 

  • Remove the two Phillips screws from the USB board.

Next » « Previous

Comments Add Note Comments are offturn on