first image

Add Note Edit Step 13  ¶ 

  • This is a diagram of the keyboard ribbon clamp connector you will disconnect in the next step.

  • 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).

  • 2) After disengaging the locking bar, slide the cable out of the connector.

first image

Add Note Edit Step 14  ¶ 

  • Loosen the keyboard ribbon clamp by pushing the thin black piece toward the screen, using the tips of your fingers.

  • The black piece is very fragile and easily broken. Use care when separating it from the main socket.

  • Slide the grey keyboard ribbon out of the loosened connector.

  • Remove the upper case from the computer.

first image

Add Note Edit Step 15 — Left Fan  ¶ 

  • Disconnect the Orange ribbon cable, inverter cable, and fan cable from the logic board.

Next » « Previous

Comments Add Note Comments are offturn on