first image

Add Note Edit Step 49  ¶ 

  • Do not lift the logic board out completely without first disconnecting the DC-In connector underneath the logic board.

  • Lift the logic board partly up from the optical side.

first image

Add Note Edit Step 50  ¶ 

  • Disconnect the DC-In connector from the underside of the logic board.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 12" 1-1.5 GHz device page.

Did you successfully follow this guide?

This guide has been completed 17 times.

Comments Add Note Comments are offturn on