Installing PowerBook G4 Aluminum 12" 1-1.5 GHz LCD

  • Add Note x
  • x 4

Save money by replacing your broken LCD element.

Sections
Files
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — LCD  ¶ 

  • Open the computer and rotate the display as far as possible.

  • Remove the T6 Torx screw from the bottom left corner of the display assembly. The computer casing will not allow the screwdriver to be inserted directly into the screw, so be careful not to strip the screw.

first image

Add Note Edit Step 3  ¶ 

  • Remove the T6 Torx screw from the bottom right corner of the display assembly.

  • To avoid cross-threading these screws during reinstallation, use a pair of tweezers to start each screw in its hole before using your Torx screwdriver to tighten them.

Next » « Previous

Comments Add Note Comments are offturn on