Installing PowerBook G4 Aluminum 12" 1-1.5 GHz DC-to-DC Board

  • Author: iRobot
  • Difficulty: Difficult
  • Add Note x

The DC-to-DC board connects the battery to the computer.

Sections
Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — EMI Finger  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Remove the long black Phillips screw next to the memory card.

  • Remove the small EMI finger beneath the black screw.

Next » « Previous

Comments Add Note Comments are offturn on