first image

Add Note Edit Step 49  ¶ 

  • Do not lift the logic board out completely without first disconnecting the DC-In connector underneath the logic board.

  • Lift the logic board partly up from the optical side.

first image

Add Note Edit Step 50  ¶ 

  • Disconnect the DC-In connector from the underside of the logic board.

first image

Add Note Edit Step 51 — DC-In Board  ¶ 

  • There may be black tape covering the screw in the following step, remove it if necessary.

  • Remove the single Phillips screw that attaches the DC-In board to the lower case.

Next » « Previous

Comments Add Note Comments are offturn on