first image

Add Note Edit Step 28 — Power Card  ¶ 

  • Remove the single black T8 Torx screw from the power card.

  • Grasp the power card near the black plastic shield toward the center of the case and lift up.

  • Occasionally, a post connecting the power card to the logic board will come out with the power card.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G3 Wallstreet device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on