first image

Add Note Edit Step 4  ¶ 

  • Disconnect the two keyboard connectors by disengaging the clamps and pulling the ribbons directly upward.

first image

Add Note Edit Step 5  ¶ 

  • Slide a spudger or screwdriver downward between each plastic strain relief cable and the wall of the case in order to bow out the cable beyond the small tab holding it in place.

  • Once the strain relief cables are free, lift the keyboard off.

first image

Add Note Edit Step 6  ¶ 

  • Your laptop should look approximately like this.

Next » « Previous

Comments Add Note Comments are offturn on