first image

Add Note Edit Step 40 — Framework  ¶ 

  • Remove the single short black Torx screw anchoring the metal framework to the lower casing.

  • Use a five millimeter nut driver or needle-nose pliers to remove the small metal nut from the bolt in the laptop's back left corner.

  • If you're using pliers, be extremely careful not to let them slip or you may damage the logic board.

first image

Add Note Edit Step 41  ¶ 

  • Disconnect the fan cable from the left side of the logic board.

first image

Add Note Edit Step 42  ¶ 

  • Turn the laptop so that its back is facing you.

  • Lift up on the left side of the metal framework and remove the single black Torx screw.

Next » « Previous

Comments Add Note Comments are offturn on