Introduction
This guide details the removal of the main fan from the fan housing.
What you need
-
-
Pull on outer latch.
-
Lower door until it is level with your work surface.
-
-
-
Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.
-
-
-
-
To fully remove the fan, unfasten the 4 screws on the front of the bracing using the Phillips #2 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.