PlayStation Vita

The PlayStation Vita is the successor to the PSP. It contains a beefed up processor and graphics, and includes the addition of a second analog stick. It was released February 15, 2012.

Start a New Guide Ask a Question

Powered by Dozuki: The easy way to make online manuals.

« Back to device

Page 1 of 7

Installing PlayStation Vita Motherboard

Featured Guide

This guide has been found to be exceptionally cool by the iFixit staff.

Install the motherboard on the PlayStation Vita.

Author: Brittany McCrigler
Time required: 30-40 Minutes
Difficulty: Moderate

This guide takes you through the process of installing the motherboard.

Sections

Tools

View:
Single page

Formats:
PDF
XML
Embed

Edit Step 1 — Case Separation ¶

Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

Edit Step 2 ¶

Using your fingernail or a spudger, pry open the accessory port cover on the bottom of the device.
Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

Edit Step 3 ¶

Remove the two 5.4mm Phillips #00 screws on the top of the device near the charging port.

Edit Step 4 ¶

Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.
Continue working your way around the device gently prying it open.
There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.