first image
thumb image 1
thumb image 2

Add Note Edit Step 16  ¶ 

  • Use a PSP opening tool to disconnect the display cable from the logic board.

  • The D-pad may come loose while prying the logic board.

  • The logic board should now be free from the rest of the device.

  • During reassembly, make sure to properly line up the power button with the power button lever on the logic board.

first image

Add Note Edit Step 17 — Gamepad Buttons  ¶ 

  • Lift the gamepad buttons out of the PSP Go.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PSP Go device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on