first image

Add Note Edit Step 7  ¶ 

  • Gently pull the sticker away from the battery connector, just enough so that the connector is visible.

  • Wedge a PSP opening tool in between the connector and logic board, and gently pull the connector upwards.

  • Make sure not to disconnect the white connector socket on the logic board, and just the connector itself.

first image
thumb image 1
thumb image 2

Add Note Edit Step 8  ¶ 

  • Use a PSP opening tool to pop out the battery, being careful not to snag the "Warranty Void" sticker in the process.

  • When putting a new battery into the PSP Go, make sure you hold the "Warranty Sticker" so you don't put the battery on top of it.

first image

Add Note Edit Step 9 — Logic Board  ¶ 

  • Remove the single Phillips screw securing the logic board to the inner case.

Next » « Previous

Comments Add Note Comments are offturn on