Installing PSP 300x Motherboard

User-Contributed Guide

User-Contributed Guide

This guide is not managed by iFixit staff.

Incorrect Text

Incorrect Text

This guide contains steps with ambiguous, improper, duplicate, misleading, or off-topic text.

Grammatical Errors

Grammatical Errors

This guide has grammatical errors or does not meet iFixit's writing guidelines.

  • Author: mbnewsom
  • Time required: 15 to 20 minutes
  • Difficulty: Easy
  • Add Note x
  • x 4

Steps for removing the motherboard of a Sony PSP-3000

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Start on the back of the device. This is where the battery and the battery cover are located.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • The battery door is located on the left side when looking at the PSP from the back. Lift open the battery door to reveal the battery. Remove the battery cover.

  • Using your finger, pry up the top edge of the battery. Continue to pull the top edge until the bottom of the battery is free.

  • Remove the battery.

first image

Add Note Edit Step 3 — Casing  ¶ 

  • Using a spudger or fingernail, peel back the warranty sticker that is behind the battery.

Next » « Previous

Comments Add Note Comments are offturn on