Installing Nintendo DSi Lower Case Assembly

Replace a cosmetically damaged Nintendo DSi lower case.

  • Add Note x

Use this guide to replace the lower case assembly, including the trigger buttons, SD slot, and stylus holder.

Sections
Tools
Relevant parts
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Battery  ¶ 

  • Unscrew the two Phillips screws securing the battery cover to the lower case.

  • The screws remain captive to the battery cover.

  • Grasp the battery cover and lift out of the lower case.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Wedge the edge of an opening tool in between the top of the battery and its lower case housing and pry upwards to dislodge the battery.

  • Grasp the battery and remove it from the DSi.

first image
thumb image 1
thumb image 2

Add Note Edit Step 3 — Lower Case Assembly  ¶ 

  • Two screws are hidden underneath two rubber feet highlighted in red.

  • Use the tip of a spudger to pry the rubber foot out of the lower case.

  • In the same manner, remove the remaining foot off the lower case.

Next » « Previous

Comments Add Note Comments are offturn on