Installing Microsoft Zune HD Battery & Logic Board

  • Add Note x

Faulty battery or logic board? Replace them!

Sections
Tools
Tools (continued)
first image

Add Note Edit Step 1 — Upper Rear Panel  ¶ 

  • Remove the four Tri-Wing screws securing the upper rear panel to the inner chassis.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Slightly rotate the top edge of the upper rear panel away from the Zune.

  • Lift the upper rear panel straight up off the black plastic lower rear panel.

first image
thumb image 1
thumb image 2

Add Note Edit Step 3 — Lower Rear Panel  ¶ 

  • Insert a small Zune opening tool into the gap between the logic board and one side of the black plastic lower rear panel.

  • Carefully twist the Zune opening tool to pop the lower rear panel off the clips attaching it to the Zune.

  • Repeat this process for the other side of the lower rear panel.

Next » « Previous

Comments Add Note Comments are offturn on