Installing MacBook Pro 17" Unibody Hard Drive

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

  • Add Note x
first image

Add Note Edit Step 1 — Hard Drive  ¶ 

  • Remove the two Phillips screws securing the hard drive bracket to the upper case.

  • These screws are captive to the hard drive bracket.

first image

Add Note Edit Step 2  ¶ 

  • Remove the hard drive bracket from the upper case.

first image

Add Note Edit Step 3  ¶ 

  • Use the hard drive's pull tab to lift it out of the upper case.

  • Don't try to completely remove the hard drive just yet! Its cable is still connected.

Next » « Previous

Comments Add Note Comments are offturn on