first image

Add Note Edit Step 4 — Upper Case  ¶ 

  • Remove the three Phillips screws in the battery compartment near the latch. Apple was nice enough to tilt these screws at a slight angle to make them easier to remove.

first image

Add Note Edit Step 5  ¶ 

  • Remove the following six screws:

    • Two T6 Torx screws on either side of the RAM slot.

    • Four Phillips screws along the hinge.

first image

Add Note Edit Step 6  ¶ 

  • Remove the four Phillips screws on the port side of the computer.

Next » « Previous

Comments Add Note Comments are offturn on