first image

Add Note Edit Step 16  ¶ 

  • Lift the lift fan up and carefully peel up the tape securing the fan to the heat sink as you go.

first image

Add Note Edit Step 17 — Left I/O Board  ¶ 

  • Disconnect the hard drive and ExpressCard connectors from the left side of the logic board.

first image

Add Note Edit Step 18  ¶ 

  • Disconnect the two antenna cables attached to the Airport Extreme card.

  • The white antenna cable connects to the left side of the Airport Extreme card.

Next » « Previous

Comments Add Note Comments are offturn on