first image

Add Note Edit Step 16 — ExpressCard Cage  ¶ 

  • Disconnect the hard drive and ExpressCard connectors from the left side of the logic board.

first image

Add Note Edit Step 17  ¶ 

  • Disconnect the three antenna cables attached to the Airport Extreme card.

  • Apple was kind enough to include a label showing where each color antenna cable plugs in - just make sure to look at this when reconnecting the antenna cables.

first image

Add Note Edit Step 18  ¶ 

  • Remove the single black T6 Torx screw located just above the Airport Extreme card.

Next » « Previous

Comments Add Note Comments are offturn on