first image

Add Note Edit Step 10  ¶ 

  • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

  • Remove the upper case.

first image

Add Note Edit Step 11 — Display Assembly  ¶ 

  • Disconnect the three antenna cables attached to the Airport Extreme card.

  • Apple was kind enough to include a label showing where each color antenna cable plugs in - just make sure to look at this when reconnecting the antenna cables.

first image

Add Note Edit Step 12  ¶ 

  • Deroute the Airport antenna cables from their channel in the left speaker.

Next » « Previous

Comments Add Note Comments are offturn on