first image
thumb image 1
thumb image 2

Add Note Edit Step 19  ¶ 

  • Lift the logic board from its left edge and raise it until the ports clear the side of the upper case.

  • Pull the logic board away from the side of the upper case and remove it, minding the DC-in board that may get caught.

  • Be careful not to rip out the fragile connector plug of the microphone assembly.

first image
thumb image 1
thumb image 2

Add Note Edit Step 20 — Upper Case  ¶ 

  • Remove two Phillips screws securing the hard drive bracket to the upper case.

  • The screws remain captive to the bracket.

  • Lift the the retaining bracket out from the upper case.

first image

Add Note Edit Step 21  ¶ 

  • Lift the hard drive from its free edge and pull it out of the chassis, minding the cable attaching it to the computer.

Next » « Previous

Comments Add Note Comments are offturn on