first image
thumb image 1
thumb image 2

Add Note Edit Step 13  ¶ 

  • Lift the logic board from its left edge and raise it until the ports clear the side of the upper case.

  • Pull the logic board away from the side of the upper case and remove it, minding the DC-in board that may get caught.

  • Be careful not to rip out the fragile connector plug of the microphone assembly.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Pro 13" Unibody Mid 2009 device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on