first image

Add Note Edit Step 25  ¶ 

  • Remove the following 2 screws from the Airport card:

    • One 3 mm Phillips from the left side.

    • One 8 mm Phillips from the right side.

first image

Add Note Edit Step 26  ¶ 

  • Grasp the Airport card at its top and slide it toward the screen and out of the computer.

first image

Add Note Edit Step 27  ¶ 

  • Use a spudger to disconnect the left speaker connector from the logic board.

  • Lift the left speaker out of the computer.

Next » « Previous

Comments Add Note Comments are offturn on