first image

Add Note Edit Step 16  ¶ 

  • Peel up the silver foil tape between the fan and the optical drive.

first image

Add Note Edit Step 17  ¶ 

  • Use a spudger to move the gray display data and black speaker cables to the right. This will reveal a silver screw securing the fan housing to the lower case.

first image

Add Note Edit Step 18  ¶ 

  • Remove the following 2 screws:

    • One 3 mm Phillips on the right side of the fan.

    • One 6 mm Phillips on the left side of the fan.

    • Two Phillips screws on the top left and bottom left of the fan.

Next » « Previous

Comments Add Note Comments are offturn on