Installing MacBook Core 2 Duo Hard Drive

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x

How to remove the hard drive, along with its cable and bracket from your computer.

Sections
Tools
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to rotate the battery-locking screw 90 degrees clockwise.

first image

Add Note Edit Step 2  ¶ 

  • Lift the battery out of the computer.

first image

Add Note Edit Step 3 — Memory Cover  ¶ 

  • Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.

  • The screws are captive to the metal memory cover so you cannot lose them.

first image

Add Note Edit Step 4  ¶ 

  • Rotate the L-shaped memory cover so it clears the battery compartment opening and lift it up and out of the computer.

first image

Add Note Edit Step 5 — Hard Drive  ¶ 

  • Grasp the white plastic tab attached to the hard drive and pull it to the right, removing the hard drive from the computer.

  • The hard drive goes back into its compartment with the label facing down.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Core 2 Duo device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Required Tools

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 11 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 22 in stock

Sorting Tray

$7.95 · 16 in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$9.95 · 50+ in stock

Popular Device Products

Arctic Silver Thermal Paste

$8.95 · 50+ in stock

Arctic Silver ArctiClean

$7.95 · 50+ in stock

MacBook Battery

$99.95 · 15 in stock

MacBook 13.3" LCD Panel

$149.95 · 35 in stock

Comments Add Note Comments are offturn on