first image

Add Note Edit Step 13 — Hard Drive Connector  ¶ 

  • Use the white plastic pull-tab to slide the hard drive to the left and out of the computer.

first image

Add Note Edit Step 14  ¶ 

  • Disconnect the orange optical drive ribbon cable from the logic board.

first image

Add Note Edit Step 15  ¶ 

  • Disconnect the newly-revealed display data cable. If there is no pull-tab on the top of the connector, it may be helpful to use a spudger to disconnect this connector.

Next » « Previous

Comments Add Note Comments are offturn on