Installing MacBook Air Models A1237 and A1304 Trackpad Control Cable

  • Add Note x

The ins and outs of replacing your trackpad control cable.

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Lower Case  ¶ 

  • Remove the following 10 screws securing the lower case to the Air:

    • Six 2.8 mm Phillips screws.

    • Two 3.8 mm Phillips screws.

    • Two 5.4 mm Phillips screws.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.

first image

Add Note Edit Step 3 — Battery  ¶ 

  • Disconnect the battery connector by pulling it straight out of its socket.

Next » « Previous

Comments Add Note Comments are offturn on