Installing MacBook Air Models A1237 and A1304 Logic Board Bracket

  • Add Note x

The logic board bracket holds the trackpad control cable connector and the AirPort/Bluetooth connector securely to the logic board.

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Lower Case  ¶ 

  • Remove the following 10 screws securing the lower case to the Air:

    • Six 2.8 mm Phillips screws.

    • Two 3.8 mm Phillips screws.

    • Two 5.4 mm Phillips screws.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.

first image

Add Note Edit Step 3 — Battery  ¶ 

  • Disconnect the battery connector by pulling it straight out of its socket.

first image

Add Note Edit Step 4  ¶ 

  • Remove the following nine screws securing the battery to the Air:

    • Four 2.9 mm Phillips.

    • Four 3.8 mm Phillips.

    • One 7.2 mm Phillips.

first image

Add Note Edit Step 5  ¶ 

  • Lift the battery out of the Air.

first image

Add Note Edit Step 6 — Logic Board Bracket  ¶ 

  • Remove the two small Phillips screws securing the logic board bracket to the upper case.

first image

Add Note Edit Step 7  ¶ 

  • Lift the logic board bracket out of the upper case.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Air Models A1237 and A1304 device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Required Tools

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Related Products

MacBook Air Logic Board Bracket

$9.95 · 31 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 22 in stock

Sorting Tray

$7.95 · 16 in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$9.95 · 50+ in stock

Comments Add Note Comments are offturn on