Installing MacBook Air Models A1237 and A1304 Battery

  • Add Note x
  • x 24

Don't pay Apple to replace your worn out battery. Do it yourself!

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Lower Case  ¶ 

  • Remove the following 10 screws securing the lower case to the Air:

    • Six 2.8 mm Phillips screws.

    • Two 3.8 mm Phillips screws.

    • Two 5.4 mm Phillips screws.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.

first image

Add Note Edit Step 3 — Battery  ¶ 

  • Disconnect the battery connector by pulling it straight out of its socket.

first image

Add Note Edit Step 4  ¶ 

  • Remove the following nine screws securing the battery to the Air:

    • Four 2.9 mm Phillips.

    • Four 3.8 mm Phillips.

    • One 7.2 mm Phillips.

first image

Add Note Edit Step 5  ¶ 

  • Lift the battery out of the Air.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Air Models A1237 and A1304 device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on